Conserte seus objetos Comunidade Loja

Hasbro Bop-It Micro Series Buttons Replacement

Introdução

If the game is turned on but the Bop-It button(s) does not work, this is because the button inside the device that provides functionality may be broken. To effectively replace them see this step-by-step guide.

O que você precisa

  1. Hasbro Bop-It Micro Series Buttons Replacement, Back Case: passo 1, imagem 1 %32

    • Loosen the two captive 8 mm screws in the back cover using a Phillips #0 screwdriver.

    Editar

  2. Hasbro Bop-It Micro Series Buttons Replacement: passo 2, imagem 1 %32

    • Remove the six 6 mm screws from the back cover using a Phillips #0 screwdriver.

    • When removing the final screw, hold the assembly together. There is a spring inside the device which will pop the assembly apart when all the screws are removed.

    Editar

  4. Hasbro Bop-It Micro Series Buttons Replacement: passo 3, imagem 1 %32

    • Carefully separate the two sections, leaving them connected by the wires.

    Editar

  5. Hasbro Bop-It Micro Series Buttons Replacement, Buttons: passo 4, imagem 1 %32

    • Remove the buttons by de-soldering them from the wires they are attached to or from the mother board. Refer to the soldering guide here.

    Editar

  6. Hasbro Bop-It Micro Series Buttons Replacement: passo 5, imagem 1 %32

    • After removing the buttons, solder new, operational buttons back into place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

Glenn Haag

Membro desde: 09/29/16

479 Reputação

Autoria de 3 guias

Emblemas: 8

+5 outros emblemas

Equipe

IUPUI, Team 3-1, Harley Fall 2016 Membro de IUPUI, Team 3-1, Harley Fall 2016

IUPUI-HARLEY-F16S3G1

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 8

Últimos 30 dias: 20

Duração total: 1,890