Hasbro Bop-It Micro Series Battery Replacement

Introdução

There are no previous steps needed. All that is required is a #0 Phillips Screwdriver, (2) fresh AAA batteries, and a few minutes of time.

Unscrew the (2) #4 Phillips head 8 mm screws on the back cover using a Phillips #0 screwdriver. The screws are captured and do not need to be completely removed from the back cover.

The batteries are now accessible. Remove batteries using fingers or plastic spudger.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Membro desde: 09/29/16

139 Reputação

Autoria de 2 guias

IUPUI-HARLEY-F16S3G1

Membros da 3

Autoria de 10 guias

uh can you do one for the 2016 bop it