Conserte seus objetos Comunidade Loja

Harman Kardon Onyx Studio 2 Control Board Replacement

Introdução

If the buttons on your device aren't working, it may be time to replace your control board. Follow this guide to do so.

O que você precisa

  1. Harman Kardon Onyx Studio 2 Control Board Replacement, Front Panel: passo 1, imagem 1 %32 Harman Kardon Onyx Studio 2 Control Board Replacement, Front Panel: passo 1, imagem 2 %32 Harman Kardon Onyx Studio 2 Control Board Replacement, Front Panel: passo 1, imagem 3 %32

    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

    Editar

  2. Harman Kardon Onyx Studio 2 Control Board Replacement: passo 2, imagem 1 %32 Harman Kardon Onyx Studio 2 Control Board Replacement: passo 2, imagem 2 %32

    • Remove the five 14.4 mm T10 Torx screws.

    Editar

  3. Harman Kardon Onyx Studio 2 Control Board Replacement: passo 3, imagem 1 %32

    • Gently pull the front apart from the back.

    Editar

  5. Harman Kardon Onyx Studio 2 Control Board Replacement: passo 4, imagem 1 %32 Harman Kardon Onyx Studio 2 Control Board Replacement: passo 4, imagem 2 %32

    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

    Editar

  6. Harman Kardon Onyx Studio 2 Control Board Replacement, Control Board: passo 5, imagem 1 %32

    • Pull the silicone button band off of the outer edge of the speaker.

    Editar

  7. Harman Kardon Onyx Studio 2 Control Board Replacement: passo 6, imagem 1 %32 Harman Kardon Onyx Studio 2 Control Board Replacement: passo 6, imagem 2 %32

    • Disconnect the two pressure connections from the circuit board.

    Editar

  8. Harman Kardon Onyx Studio 2 Control Board Replacement: passo 7, imagem 1 %32 Harman Kardon Onyx Studio 2 Control Board Replacement: passo 7, imagem 2 %32

    • Gently remove the control board band by placing fingers in contact with it through the button openings.

    • Work from the outer edges in so as not to bend the band.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Autor(a)

com 1 outro contribuidor

Alexandra Achtenberg

Membro desde: 02/02/17

2.046 Reputação

Autoria de 6 guias

Emblemas: 16

+13 outros emblemas

Equipe

USF Tampa, Team 16-5, Blackwell Spring 2017 Membro de USF Tampa, Team 16-5, Blackwell Spring 2017

USFT-BLACKWELL-S17S16G5

Membros da 3

Autoria de 24 guias

9 comentários

Do you guys know where to get a control board, because my board is broken so i am looking for one

Zhou Yuqi - Responder

Where to get control board onyx 2.

Mike Champagne - Responder

My on/off button keeps blinking…..would somebody please email me cause I am a techno nitwit……..i’m gonna bring this piece of non chargeable crap outside and go Italian on it with the 12 gauge! SERENITY NOW!

Sincerely,

email ; jorcal3318@aol.com

Frank Vitolo - Responder

power button continually blinks. Won’t turn on, can’t pair, no other action can be taken, just the blinking power button. what’s the solution? Please share….

rachael friesen -

Speaker plays for split second then fades away like wtf

Paul Berrellez - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 8

Últimos 30 dias: 83

Duração total: 14,218