Conserte seus objetos Comunidade Loja

Hannspree SN12E2 Speaker Replacement

Introdução

This guide will show you how to remove and replace the Speaker in the Hannspree SN12E2 laptop. Speakers are used to produce sound for your device if your device is not producing sound or if the sound is static or peaking this may be the solution.

O que você precisa

  1. Hannspree SN12E2 Speaker Replacement, Battery: passo 1, imagem 1 %32

    • Unplug and power off your laptop.

    Editar

  2. Hannspree SN12E2 Speaker Replacement: passo 2, imagem 1 %32

    • Close your laptop .

    • Place your laptop face down on a flat surface.

    Editar

  3. Hannspree SN12E2 Speaker Replacement: passo 3, imagem 1 %32 Hannspree SN12E2 Speaker Replacement: passo 3, imagem 2 %32 Hannspree SN12E2 Speaker Replacement: passo 3, imagem 3 %32

    • Unlatch the lock on the top right of your laptop first.

    • You will need to pull on the lock on the left side and remove the battery at the same time

    • The left lock is a spring lock and needs constant pressure applied in order to stay open.

    Editar

  4. Hannspree SN12E2 Speaker Replacement, Touchpad Plane/Keyboard: passo 4, imagem 1 %32

    • Remove all the 5mm PH0 screws on the back cover

    Editar

  6. Hannspree SN12E2 Speaker Replacement: passo 5, imagem 1 %32 Hannspree SN12E2 Speaker Replacement: passo 5, imagem 2 %32 Hannspree SN12E2 Speaker Replacement: passo 5, imagem 3 %32

    • Gently pry the case apart starting at the lower right corner using the small spudger

    • Move around the case gently prying until the touchpad plane is free from the rest of the case

    Editar

  7. Hannspree SN12E2 Speaker Replacement: passo 6, imagem 1 %32 Hannspree SN12E2 Speaker Replacement: passo 6, imagem 2 %32

    • Gently lift up on the touchpad portion of the touchpad plane

    • Unplug the ZIFF connector by pulling gently on the black retaining blade and removing the white flat flex cable

    • Pull the touchpad away from the rest of the case

    Editar

  8. Hannspree SN12E2 Speaker Replacement: passo 7, imagem 1 %32

    • Gently lift up on the loose keyboard to expose the ZIFF connector.

    • Unplug the keyboard ZIFF following the same instructions as the touchpad ZIFF

    Editar

  9. Hannspree SN12E2 Speaker Replacement, Speaker: passo 8, imagem 1 %32 Hannspree SN12E2 Speaker Replacement, Speaker: passo 8, imagem 2 %32

    • Remove the two screws on the speakers.

    Editar

  10. Hannspree SN12E2 Speaker Replacement: passo 9, imagem 1 %32

    • Gently remove the JST connector by pulling parallel to the housing .

    • When replacing the connectors ensure that they are oriented correctly. The housing is keyed to prevent the connectors from being plugged in backwards.

    Editar

  11. Hannspree SN12E2 Speaker Replacement: passo 10, imagem 1 %32

    • Repeat same steps for other speaker if necessary.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Tim Chase

Membro desde: 03/25/19

360 Reputação

Autoria de 3 guias

Emblemas: 7

+4 outros emblemas

Equipe

UMass Dartmouth, Team S2-G2, Simcock Spring 2019 Membro de UMass Dartmouth, Team S2-G2, Simcock Spring 2019

UMASSD-SIMCOCK-S19S2G2

Membros da 4

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 141