Introdução
This procedure requires a moderate level of electrical wiring experience, and a few listed tools.
O que você precisa
-
Passo 1 Base Removal
Cuidado: as etapas de 1 a 5 são provenientes de um guia marcado como em andamento.
-
Hold the food processor upside down and remove the two screws indicated with a screwdriver. Once unscrewed, remove the two rubber suction pads.
-
-
-
-
Use a regular nylon spudger to remove the plastic caps at these locations with moderate pressure.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.