Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Replacement of the drive gears. Do not remove grease as it helps the gears move smoothly.

Peças

Nenhum componente especificado.

  1. Turn the bowl counterclockwise and lift. Turn the bowl counterclockwise and lift.
    • Turn the bowl counterclockwise and lift.

  2. Use the nylon spudger to remove  the plastic screw covers. Use the nylon spudger to remove  the plastic screw covers.
    • Use the nylon spudger to remove the plastic screw covers.

  3. Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears. Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears. Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears.
    • Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears.

  4. Firmly grasp center piece of gear mechanism and pull straight upward. Firmly grasp center piece of gear mechanism and pull straight upward.
    • Firmly grasp center piece of gear mechanism and pull straight upward.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Angel

Membro desde: 02/02/2017

219 Reputação

2 Guias de autoria

Equipe

USF Tampa, Team 17-4, Blackwell Spring 2017 Membro de USF Tampa, Team 17-4, Blackwell Spring 2017

USFT-BLACKWELL-S17S17G4

3 Membros

7 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 8

Últimos 30 dias: 19

Duração total: 432