Hamilton Beach 51101BA Power Cord Replacement

Introdução

In this guide you are going to learn how to take out the current power cord in order to replace it with a new one.

O que você precisa

Passo 1 Power Cord

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: passo 1, imagem 1 %32

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: passo 1, imagem 2 %32

Hamilton Beach 51101BA Power Cord Replacement, Power Cord: passo 1, imagem 3 %32

Remove container from base.
Hold the blender and the container, then twist the container in a clockwise motion.
Make sure to follow the lock and unlock markings on the container.

Editar

Passo 2

Turn the blender so the bottom is facing you.
Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.

Editar

Passo 3

Lift the two wires from the motor platform.

Editar

Passo 4

Using the wire cutters, cut the end of the thick black wires.

Editar

Conclusão

To reassemble your device, you must solder the new power cord to the thin black and thin gray wires, and follow the steps in reverse order. Requires soldering skills.

Uma outra pessoa concluiu este guia.