Conserte seus objetos Comunidade Loja

Hamilton Beach 51101BA Power Button Replacement

Introdução

After using this guide you will have learned how to replace the power button to your blender. You will need to use basic tools and soldering to complete this guide.

O que você precisa

  1. Hamilton Beach 51101BA Power Button Replacement, Power Button: passo 1, imagem 1 %32 Hamilton Beach 51101BA Power Button Replacement, Power Button: passo 1, imagem 2 %32 Hamilton Beach 51101BA Power Button Replacement, Power Button: passo 1, imagem 3 %32

    • Remove the container from the base.

    • Hold the blender and the container, then twist the container in a clockwise motion.

    • Make sure to follow the lock and unlock markings on the container.

    Editar

  2. Hamilton Beach 51101BA Power Button Replacement: passo 2, imagem 1 %32

    • Turn the blender so the bottom is facing you.

    • Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.

    Editar

  4. Hamilton Beach 51101BA Power Button Replacement: passo 3, imagem 1 %32

    • Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the motor platform.

    Editar

  5. Hamilton Beach 51101BA Power Button Replacement: passo 4, imagem 1 %32 Hamilton Beach 51101BA Power Button Replacement: passo 4, imagem 2 %32

    • Unhinge the motor platform from the blender.

    • You may need a plastic spudger to unhinge the plastic bottom piece from the base of the blender.

    • You do not need to completely remove this piece from the base.

    Editar

  6. Hamilton Beach 51101BA Power Button Replacement: passo 5, imagem 1 %32

    • Pull out the rectangular green piece.

    • This is the actual power button.

    Editar

  7. Hamilton Beach 51101BA Power Button Replacement: passo 6, imagem 1 %32

    • Some experience in soldering is required!

    • On the back of the power button, desolder the red and grey wires that are connected to the piece.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

Brandon Nunez

Membro desde: 08/28/15

283 Reputação

Autoria de 2 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team 2-5, Sullivan Fall 2015 Membro de USF Tampa, Team 2-5, Sullivan Fall 2015

USFT-SULLIVAN-F15S2G5

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 16

Últimos 30 dias: 40

Duração total: 3,285