Conserte seus objetos Comunidade Loja

Hamilton Beach 51101BA Blades Replacement

Introdução

After using this guide you will learn how to replace the blades in your blender. You will need to use basic tools to complete this guide.

O que você precisa

  1. Hamilton Beach 51101BA Blades Replacement, Blades: passo 1, imagem 1 %32

    • Remove the lid from the container by holding the base and pulling up on the lid.

    Editar

  2. Hamilton Beach 51101BA Blades Replacement: passo 2, imagem 1 %32 Hamilton Beach 51101BA Blades Replacement: passo 2, imagem 2 %32 Hamilton Beach 51101BA Blades Replacement: passo 2, imagem 3 %32

    • Remove the container from the blender.

    • Hold the blender and the container, then twist the container in a clockwise motion.

    • Make sure to follow the lock and unlock markings on the container.

    Editar

  4. Hamilton Beach 51101BA Blades Replacement: passo 3, imagem 1 %32 Hamilton Beach 51101BA Blades Replacement: passo 3, imagem 2 %32 Hamilton Beach 51101BA Blades Replacement: passo 3, imagem 3 %32

    • Avoid placing your fingers on the blade, as they could be sharp.

    • Using a pair of pliers to hold the blade in place, use your other hand to unscrew the rubber piece on the bottom of the container.

    • Remove the rubber piece and the two washers by rotating the rubber piece counter-clockwise.

    Editar

  5. Hamilton Beach 51101BA Blades Replacement: passo 4, imagem 1 %32

    • Carefully, pull the blades out of the container as they are very sharp.

    • Using the pliers, remove blades and the washer around the blade shaft.

    Editar
Conclusão

To reassemble your device with the new blade assembly, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

Brandon Nunez

Membro desde: 08/28/15

283 Reputação

Autoria de 2 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team 2-5, Sullivan Fall 2015 Membro de USF Tampa, Team 2-5, Sullivan Fall 2015

USFT-SULLIVAN-F15S2G5

Membros da 4

Autoria de 5 guias

3 comentários

Need to know how to install parts and how many

papi3701@aol.com - Responder

Looks like I missed parts need to know the order son cuantaty

papi3701@aol.com - Responder

For my 501101B blender, the whole blade assembly popped out, so the blended smoothie draws at the bottom like a water falls How to fix this?

Joyful Joy - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 29

Últimos 30 dias: 105

Duração total: 11,525