Menu

Your Settings

Minha bancada de trabalho

Ganhe acesso rapidamente a guias, partes e respostas para seus dispositivos
Carrinho

Parece que seu carrinho de compras está vazio

Visite Nossa Loja

Hair Dryer Power Supply Replacement

Escrito Por: Mitch (e 6 outros contribuidores)
  • Comentários: 0
  • Favoritos: 1
  • Execuções: 1

Dificuldade

Moderado

Passos

9

Tempo necessário

Sugerir um tempo??

Seções

3

Sinalizadores

3

Bullets!

Balas!

Melhor coordenação com marcas e cor/tipo de balas ajudará a tornar mais claro este guia!

Slice and Dice

Despedaçar

As etapas neste guia devem se dividir e serem feitas em uma série de guias de pré-requisito.

Better Introduction

Melhor Introdução

Melhore este guia, completando ou revendo a sua introdução.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

  1. Identify the black air concentrating nozzle.

    • Identify the black air concentrating nozzle.

    Editar

  2. Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    Editar

  3. Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

    Editar

  4. Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

    Kit de Reparo de Bateria do MacBook

    A partir de $69.99

    Buy Now

  5. Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    Editar

  6. Separate the hair dryer grating into the three pieces seen in the image.

    • Separate the hair dryer grating into the three pieces seen in the image.

    Editar

  7. Locate the screws on the handle and remove with a Phillips screwdriver

    • Locate the screws on the handle and remove with a Phillips screwdriver

    Editar

  8. Carefully separate the plastic case with Plastic Opening Tools

    • Carefully separate the plastic case with Plastic Opening Tools

    Editar

  9. Your hairdryer should now be disassembled and you should easily be able to see the fan, motor, heating element cover, and internal wiring.

    • Your hairdryer should now be disassembled and you should easily be able to see the fan, motor, heating element cover, and internal wiring.

    Editar

  10. After disassembly and isolating the button switchboard, locate the small component that is directly connected to the power cord. Desolder the wires using a desoldering wick and a soldering iron. Refer to the soldering page below.

    • After disassembly and isolating the button switchboard, locate the small component that is directly connected to the power cord. Desolder the wires using a desoldering wick and a soldering iron. Refer to the soldering page below.

    • Soldering Skills

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor

com 6 outros contribuidores

Mitch

Membro desde: 04-10-2012

31 reputação

5 Guias de autoria

Emblemas: 9

+6 emblemas

Equipe

Cal Poly, Team 24-29, Regan Fall 2012 Membro de Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

5 Membros

6 Guias de autoria

0 comentários

Adicionar um comentário

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 60

Últimos 30 dias: 255

Todo: 13,912