Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Hair Dryer Grating Replacement

O que você precisa

  1. Hair Dryer Grating Replacement, Nozzle: passo 1, imagem 1 %32 Hair Dryer Grating Replacement, Nozzle: passo 1, imagem 2 %32
    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    • If nozzle is not attached, skip to next step.

  2. Hair Dryer Grating Replacement, Grating: passo 2, imagem 1 %32
    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

  3. Hair Dryer Grating Replacement: passo 3, imagem 1 %32
    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

  4. Hair Dryer Grating Replacement: passo 4, imagem 1 %32
    • Separate the hair dryer grating into the three pieces seen in the image.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Mitch

Membro desde: 10/04/12

34 Reputação

Autoria de 5 guias

Equipe

Cal Poly, Team 24-29, Regan Fall 2012 Membro de Cal Poly, Team 24-29, Regan Fall 2012

CPSU-REGAN-F12S24G29

Membros da 5

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 13

Duração total: 2,450