Introdução

If the cell phone is not charging correctly with different USB chargers, the charging port may be the cause of the issue.

  1. Turn off your cell phone before disassembling.
    • Turn off your cell phone before disassembling.

    Adicionar comentário

  2. Remove the two 1.17mm Torx T3 screws from the bottom of the phone.
    • Remove the two 1.17mm Torx T3 screws from the bottom of the phone.

    Adicionar comentário

    • Use the Sim card ejection tool to remove both the sim card trays.

    Adicionar comentário

    • To prepare the iOpener insert it in the microwave for 30 seconds and apply it on the side edges of the phone so that the glue underneath will soften.

    Adicionar comentário

    • Pry off the back with a plastic opening tool.

    Adicionar comentário

    • Remove the six 1.5mm Phillips #000 screws from the bottom of the phone.

    Adicionar comentário

    • Use a plastic opening tool to disconnect the white and black antenna cables from the daughterboard.

    Adicionar comentário

    • Remove the daughterboard.

    Adicionar comentário

    • Either desolder the Micro USB port, or replace the whole daughterboard.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Klara Asllani

Member since: 25-01-2018

647 reputação

5 Guides authored

Equipe

USF Tampa, Team S7-G6, Passmore Spring 2018 Membro de USF Tampa, Team S7-G6, Passmore Spring 2018

USFT-PASSMORE-S18S7G6

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 6

Últimos 30 dias: 57

Todo: 271