Introdução

In order to remove speakers, we have to remove the phone plastic case and keyboard. This requires the spudger tool and torx screwdriver.

Power the phone off.
  • Power the phone off.

  • Use your thumb to gently press downward and away from the camera to remove the battery cover.

Adicionar comentário

Pull on the plastic tab to release the battery.
  • Pull on the plastic tab to release the battery.

Adicionar comentário

  • Use a plastic opening tool to remove the camera cover.

  • Work around the corners to avoid breaking the plastic clips that hold the camera cover on.

  • Lift the camera cover off of the phone.

Adicionar comentário

  • Remove the stylus from the phone.

  • Remove the four 5.5 mm screws with the T6 Torx Screwdriver.

  • One of the screws might be under a sticker, which will void your warranty.

Adicionar comentário

  • Be Careful! Do not insert the spudger in between the keyboard and screen. This could break the keyboard off the phone.

  • If your phone contains a memory card, you may want to remove it before proceeding with this step.

  • Insert spudger in the bottom corner as seen in the picture. Carefully slide the spudger from the bottom towards the top as seen in the second picture.

  • Lift the back case off completely.

  • The speakers might be dangling and unsecured.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Eric W

Member since: 22-09-2011

41 reputação

3 Guides authored

Equipe

Cal Poly, Team 20-28, Maness Fall 2011 Membro de Cal Poly, Team 20-28, Maness Fall 2011

CPSU-MANESS-F11S20G28

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 727