Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Use this guide to remove and replace the facerest on an HTC Vive.

  1. Be sure to power down and disconnect your Vive before beginning. Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.
    • Be sure to power down and disconnect your Vive before beginning.

    • Use a T5 Torx driver to remove the two 12 mm-long screws securing the head strap mounts on either side of the headset.

    • The mounts may fall off when the screws are removed, so be careful not to lose any parts.

  2. Remove both head strap mounts. Remove both head strap mounts. Remove both head strap mounts.
    • Remove both head strap mounts.

  3. Slide the facerest straight away from the headset to remove it. Slide the facerest straight away from the headset to remove it.
    • Slide the facerest straight away from the headset to remove it.

Conclusão

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

3 outras pessoas concluíram este guia.

Adam O'Camb

Membro desde: 11/04/2015

130.798 Reputação

378 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

134 Membros

15.565 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 18

Duração total: 738