Introdução

Remove 4 Torx screws and 2 #00 Philps

  1. First remove the back cover of your phone to expose the battery.
    • First remove the back cover of your phone to expose the battery.

    Adicionar comentário

  2. Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.
    • Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.

    Adicionar comentário

    • Take the battery out

    • When reassembling, make sure that the battery contacts match up.

    Adicionar comentário

    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone

    Adicionar comentário

    • Remove the two 4.3mm #00 Phillips screws that secure the back panel to the rest of the phone

    Adicionar comentário

    • Use the plastic opening tool to pry the clips off

    • Insert the plastic opening tool along the seams at different points to it pry up

    • This may require a bit of force. The USB port cover may fall off in this step.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Andrew Van Meter

Member since: 06-10-2011

24 reputação

3 Guides authored

Equipe

Cal Poly, Team 20-29, Maness Fall 2011 Membro de Cal Poly, Team 20-29, Maness Fall 2011

CPSU-MANESS-F11S20G29

4 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 706