Conserte seus objetos Comunidade Loja

HTC Hero Motherboard Replacement

O que você precisa

  1. HTC Hero Motherboard Replacement, Back Case: passo 1, imagem 1 %32

    • Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

    • Remove both the battery and the SD card (Press SD card in to release)

    • Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

    Editar

  2. HTC Hero Motherboard Replacement: passo 2, imagem 1 %32

    • Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

    • Insert the flat end between the back and front enclosure, working your way around the rim.

    Editar

  3. HTC Hero Motherboard Replacement: passo 3, imagem 1 %32

    • Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

    • It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

    Editar

  5. HTC Hero Motherboard Replacement: passo 4, imagem 1 %32 HTC Hero Motherboard Replacement: passo 4, imagem 2 %32

    • Carefully separate the front and back enclosures once all of the clips have been disengaged.

    • Be sure to not separate too quickly or you risk breaking an attached tab.

    Editar

  6. HTC Hero Motherboard Replacement, Motherboard: passo 5, imagem 1 %32 HTC Hero Motherboard Replacement, Motherboard: passo 5, imagem 2 %32

    • Release the two ribbon cables using a plastic opening tool.

    • Gently pry up the pop connectors used to attach the ribbon cables to the motherboard.

    Editar

  7. HTC Hero Motherboard Replacement: passo 6, imagem 1 %32 HTC Hero Motherboard Replacement: passo 6, imagem 2 %32

    • Remove the two screws located at the bottom left and right of the motherboard using a small Phillips screwdriver.

    Editar

  8. HTC Hero Motherboard Replacement: passo 7, imagem 1 %32 HTC Hero Motherboard Replacement: passo 7, imagem 2 %32

    • Gently lift the motherboard out of the front enclosure once the screws are removed.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Rosalind Villalvazo

Membro desde: 01/23/12

100 Reputação

Autoria de 2 guias

Emblemas: 5

+2 outros emblemas

Equipe

Cal Poly, Team 3-26, Amido Winter 2012 Membro de Cal Poly, Team 3-26, Amido Winter 2012

CPSU-AMIDO-W12S3G26

Membros da 5

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 1,549