Ir para o conteúdo principal

HP w2216h Power Supply Replacement

O que você precisa

  1. HP w2216h Power Supply Replacement, Screen: passo 1, imagem 1 %32
    • 'Make sure you are grounded, the power supply is not connected and you are wearing safety goggles.

    • Use the Philips #000 screwdriver to remove the 4 round12mm screws on the back panel.

  2. HP w2216h Power Supply Replacement: passo 2, imagem 1 %32 HP w2216h Power Supply Replacement: passo 2, imagem 2 %32
    • Using a Philips #000 head remove 2 flat 12 mm screws above stand mounting bracket.

    • Using a PH1 Philips head with the 150 mm flexible extension remove 1 Philips head screw under the stand mounting bracket.

    • Stand will easily pull off.

  3. HP w2216h Power Supply Replacement: passo 3, imagem 1 %32 HP w2216h Power Supply Replacement: passo 3, imagem 2 %32 HP w2216h Power Supply Replacement: passo 3, imagem 3 %32
    • Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.

    • Turn monitor so that the screen is facing you.

    • Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.

    • The best places to pry are in the lower left and lower right corners of the black bezel.

  4. HP w2216h Power Supply Replacement: passo 4, imagem 1 %32 HP w2216h Power Supply Replacement: passo 4, imagem 2 %32 HP w2216h Power Supply Replacement: passo 4, imagem 3 %32
    • Be careful of the wires attaching the power button and the control buttons. Show extreme caution to ensure the button is not damaged.

    • Lift the screen assembly from the plastic housing from the corners.

  5. HP w2216h Power Supply Replacement: passo 5, imagem 1 %32 HP w2216h Power Supply Replacement: passo 5, imagem 2 %32
    • Remove the 4 connectors from the left side of the monitor on the back.

  6. HP w2216h Power Supply Replacement: passo 6, imagem 1 %32 HP w2216h Power Supply Replacement: passo 6, imagem 2 %32 HP w2216h Power Supply Replacement: passo 6, imagem 3 %32
    • Lift the gray tape of the top of the monitor to expose the ribbon cable.

    • Remove the ribbon cable by sliding the connector towards the center of the screen assembly.

    • Lift the reflective tape next to the gray tape.

  7. HP w2216h Power Supply Replacement: passo 7, imagem 1 %32 HP w2216h Power Supply Replacement: passo 7, imagem 2 %32 HP w2216h Power Supply Replacement: passo 7, imagem 3 %32
    • Remove the 4 PH1 8mm Philips round screws on the outer edge of the screen's assembly.

    • Lift the screen from the screen assembly.

  8. HP w2216h Power Supply Replacement, Power Supply: passo 8, imagem 1 %32
    • Monitor power supplies can be dangerous. Read ifixit's monitor safety guide before working with power supplies.

    • Remove the cables connecting the power supply to the display port.

  9. HP w2216h Power Supply Replacement: passo 9, imagem 1 %32
    • Remove the four 8mm Phillips #000 head screws connecting the power supply to the screen assembly.

  10. HP w2216h Power Supply Replacement: passo 10, imagem 1 %32
    • Lift the power supply vertically out of the screen assembly

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Branflakes222

Membro desde: 03/25/16

396 Reputação

Autoria de 2 guias

Equipe

UMass Dartmouth, Team 1-1, Miles Spring 2016 Membro de UMass Dartmouth, Team 1-1, Miles Spring 2016

UMASSD-MILES-S16S1G1

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 14

Duração total: 774