Slide the silver release tab up and simultaneously lift the cover up from the left side.
  • Slide the silver release tab up and simultaneously lift the cover up from the left side.

Adicionar comentário

Push the tab from left to right to remove the cover.
  • Push the tab from left to right to remove the cover.

Adicionar comentário

Now lift the battery up and away from the device to remove it.
  • Now lift the battery up and away from the device to remove it.

Adicionar comentário

Remove the four silver screws (T5 x .25 in).
  • Remove the four silver screws (T5 x .25 in).

Adicionar comentário

Remove the single black screw (T5 x .125 in) beneath the HP sticker.
  • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

Adicionar comentário

Next, use your plastic removal tool to separate the gray back from the black center piece. For better results, start the separation at the corner piece.
  • Next, use your plastic removal tool to separate the gray back from the black center piece.

  • For better results, start the separation at the corner piece.

Adicionar comentário

Remove the back case.
  • Remove the back case.

Adicionar comentário

Now that the back cover is removed, remove the small screw (#00 Philips x .17) to the left of the SD card slot
  • Now that the back cover is removed, remove the small screw (#00 Philips x .17) to the left of the SD card slot

Adicionar comentário

Next you will need to unlock and remove the ribbon cable Carefully pull back on both sides of the brown bar using metal tweezers, unlocking the cable and slipping it out of the connector
  • Next you will need to unlock and remove the ribbon cable

  • Carefully pull back on both sides of the brown bar using metal tweezers, unlocking the cable and slipping it out of the connector

  • The bar, connector, and cable are fragile components that can be easily broken

Adicionar comentário

Next you need to remove the wire off the bottom of the mother board The easiest method is to use some metal tweezers and grip the plug close to the connector.
  • Next you need to remove the wire off the bottom of the mother board

  • The easiest method is to use some metal tweezers and grip the plug close to the connector.

  • Make sure all these connections are properly disconnected before separation of the motherboard

Adicionar comentário

Next use your plastic removal tool and separate the silver front case from the black frame.
  • Next use your plastic removal tool and separate the silver front case from the black frame.

Adicionar comentário

Now that the front cover is removed we will need to disconnect the LCD screen from the mother board. Pull the LCD connection out of the slot to properly disconnect.
  • Now that the front cover is removed we will need to disconnect the LCD screen from the mother board. Pull the LCD connection out of the slot to properly disconnect.

Adicionar comentário

Next we will need to remove the last wire from the motherboard
  • Next we will need to remove the last wire from the motherboard

  • The easiest method is to grab and pull with metal tweezers near the bottom of the plug near the connector.

Adicionar comentário

Finally the mother board can be removed from the center black frame. Finally the mother board can be removed from the center black frame.
  • Finally the mother board can be removed from the center black frame.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

John Pagliero

Member since: 27-01-2011

886 reputação

7 Guides authored

Equipe

Cal Poly, Team 3-39, Regan Winter 2011 Membro de Cal Poly, Team 3-39, Regan Winter 2011

CPSU-REGAN-W11S3G39

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 761