1. Slide the silver release tab up and simultaneously lift the cover up from the left side.
    • Slide the silver release tab up and simultaneously lift the cover up from the left side.

    Adicionar comentário

  2. Push the tab from left to right to remove the cover.
    • Push the tab from left to right to remove the cover.

    Adicionar comentário

    • Now lift the battery up and away from the device to remove it.

    Adicionar comentário

    • Remove the four silver screws (T5 x .25 in).

    Adicionar comentário

    • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

    Adicionar comentário

    • Next, use your plastic removal tool to separate the gray back from the black center piece.

    • For better results, start the separation at the corner piece.

    Adicionar comentário

    • Remove the back case.

    Adicionar comentário

    • Now that the back cover is removed, remove the small screw (#00 Philips x .17) to the left of the SD card slot

    Adicionar comentário

    • Next you will need to unlock and remove the ribbon cable

    • Carefully pull back on both sides of the brown bar using metal tweezers, unlocking the cable and slipping it out of the connector

    • The bar, connector, and cable are fragile components that can be easily broken

    Adicionar comentário

    • Next you need to remove the wire off the bottom of the mother board

    • The easiest method is to use some metal tweezers and grip the plug close to the connector.

    • Make sure all these connections are properly disconnected before separation of the motherboard

    Adicionar comentário

    • Next use your plastic removal tool and separate the silver front case from the black frame.

    Adicionar comentário

    • Now that the front cover is removed we can detach the screen

    • Remove the ribbon connector by pulling gently on the silver top. It will snap off the mother board.

    • The ribbon cable and connector can be easily removed if you genetly lift up the motherboard to create a small gap

    Adicionar comentário

    • Now the screen can be removed

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

John Pagliero

Member since: 27-01-2011

886 reputação

7 Guides authored

Equipe

Cal Poly, Team 3-39, Regan Winter 2011 Membro de Cal Poly, Team 3-39, Regan Winter 2011

CPSU-REGAN-W11S3G39

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Todo: 1,230