Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

HP iPAQ H2200 LCD Screen Replacement

O que você precisa

  1. HP iPAQ H2200 LCD Screen Replacement, Battery: passo 1, imagem 1 %32
    • Press and slide the battery cover tab to remove battery cover.

  2. HP iPAQ H2200 LCD Screen Replacement: passo 2, imagem 1 %32 HP iPAQ H2200 LCD Screen Replacement: passo 2, imagem 2 %32
    • Pull on the black tab to lift the battery out of the battery compartment.

  3. HP iPAQ H2200 LCD Screen Replacement, Main Board: passo 3, imagem 1 %32
    • Remove the stylus by sliding it out of the slot.

  4. HP iPAQ H2200 LCD Screen Replacement: passo 4, imagem 1 %32
    • Remove the CF card by sliding it out of the slot at the top of the device.

  5. HP iPAQ H2200 LCD Screen Replacement: passo 5, imagem 1 %32
    • Press down and push the black side strips toward the top of the device to remove them.

  6. HP iPAQ H2200 LCD Screen Replacement: passo 6, imagem 1 %32 HP iPAQ H2200 LCD Screen Replacement: passo 6, imagem 2 %32 HP iPAQ H2200 LCD Screen Replacement: passo 6, imagem 3 %32
    • Using the T5 Torx screwdriver, remove all six screws on the back and all screws on each side of the device.

  7. HP iPAQ H2200 LCD Screen Replacement: passo 7, imagem 1 %32 HP iPAQ H2200 LCD Screen Replacement: passo 7, imagem 2 %32
    • Remove the back faceplate by pushing and loosening the 4 side slots (2 on each side).

  8. HP iPAQ H2200 LCD Screen Replacement: passo 8, imagem 1 %32
    • Open the LCD connector, where the orange strip attaches to the main board.

  9. HP iPAQ H2200 LCD Screen Replacement: passo 9, imagem 1 %32
    • Carefully remove the orange LCD strip from the connector.

  10. HP iPAQ H2200 LCD Screen Replacement: passo 10, imagem 1 %32
    • Unscrew the 2 screws located at each top corner of the main board.

  11. HP iPAQ H2200 LCD Screen Replacement: passo 11, imagem 1 %32
    • Remove the main board by pushing outward on the two tabs located on each side near the bottom of the device.

  12. HP iPAQ H2200 LCD Screen Replacement, LCD Screen: passo 12, imagem 1 %32
    • Unscrew the two bottom screws on LCD screen that were previously located under the main board.

  13. HP iPAQ H2200 LCD Screen Replacement: passo 13, imagem 1 %32 HP iPAQ H2200 LCD Screen Replacement: passo 13, imagem 2 %32
    • Press on side tabs to loosen and remove the LCD screen.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Tyler Andrews

Membro desde: 01/13/10

209 Reputação

Autoria de 5 guias

Equipe

Cal Poly, Team 4-12, Forte Winter 2010 Membro de Cal Poly, Team 4-12, Forte Winter 2010

CPSU-FORTE-W10S4G12

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 8

Duração total: 3,964