Ir para o conteúdo principal

HP eStation Zeen Volume Buttons Replacement

O que você precisa

  1. HP eStation Zeen Volume Buttons Replacement, Volume Buttons: passo 1, imagem 1 %32 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: passo 1, imagem 2 %32 HP eStation Zeen Volume Buttons Replacement, Volume Buttons: passo 1, imagem 3 %32
    • Use a metal spudger to remove the four screw caps.

    • Remove the four 6 mm screws using a Philips #0 screwdriver.

  2. HP eStation Zeen Volume Buttons Replacement: passo 2, imagem 1 %32 HP eStation Zeen Volume Buttons Replacement: passo 2, imagem 2 %32 HP eStation Zeen Volume Buttons Replacement: passo 2, imagem 3 %32
    • Insert a plastic opening tool and slide it along the edge to open the back panel.

    • Lift the back panel away from the device.

  3. HP eStation Zeen Volume Buttons Replacement: passo 3, imagem 1 %32
    • Disconnect the battery clip with a plastic opening tool.

    • Be gentle as the connector is fragile.

  4. HP eStation Zeen Volume Buttons Replacement: passo 4, imagem 1 %32
    • Remove the two 6 mm screws using a Philips #0 screwdriver.

  5. HP eStation Zeen Volume Buttons Replacement: passo 5, imagem 1 %32
    • Pull the ribbon from the board.

    • Be gentle as the ribbon is fragile.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

dalton hale

Membro desde: 09/26/16

503 Reputação

Autoria de 4 guias

Equipe

USF Tampa, Team 16-4, Eyestone Fall 2016 Membro de USF Tampa, Team 16-4, Eyestone Fall 2016

USFT-EYESTONE-F16S16G4

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 8

Duração total: 195