Conserte seus objetos Comunidade Loja

HP Z2 Mini G3 Access Panel Replacement

Introdução

This is the top cover to access the interior components of the HP Z2 Mini G3 (Product No. 1LE81UP#ABA). This guide can direct you to remove the panel.

Be sure to turn off the device and disconnect the A/C power cord before removing the panel.

Components inside the device are also subject to static damage, so try and work on a hard surface to reduce this risk.

  1. HP Z2 Mini G3 Access Panel Replacement, Access Panel: passo 1, imagem 1 %32

    • Turn the device so the back-side of the device is facing you.

    • Be sure that the power is off and the A/C power cord has been disconnected before starting. Removing hardware while the power is on could damage the device or harm yourself.

    • Components of the device are subject to static damage. Work on a hard, grounded surface to prevent damage to the workstation.

    Editar

  3. HP Z2 Mini G3 Access Panel Replacement: passo 2, imagem 1 %32 HP Z2 Mini G3 Access Panel Replacement: passo 2, imagem 2 %32

    • Slide and hold the latch in the direction of the engraved arrow (to the right).

    Editar

  4. HP Z2 Mini G3 Access Panel Replacement: passo 3, imagem 1 %32 HP Z2 Mini G3 Access Panel Replacement: passo 3, imagem 2 %32

    • While holding the latch, lift the access panel upwards and towards yourself and set it aside upside-down.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 31

Duração total: 1,000