Conserte seus objetos Comunidade Loja

HP Spectre x360 13-aw0xxx Speaker Replacement

Introdução

If the speakers on your HP Specter laptop are not working use this step by step guide to show you how to remove and replace them.

O que você precisa

  1. HP Spectre x360 13-aw0xxx Speaker Replacement, Battery: passo 1, imagem 1 %32 HP Spectre x360 13-aw0xxx Speaker Replacement, Battery: passo 1, imagem 2 %32

    • Use two opening tools, one on either side of the battery plug, to slowly pull the plug straight out of its port.

    • Alternatively, use your fingernails.

    Editar

  2. HP Spectre x360 13-aw0xxx Speaker Replacement: passo 2, imagem 1 %32 HP Spectre x360 13-aw0xxx Speaker Replacement: passo 2, imagem 2 %32

    • Use a Phillips #00 screwdriver to remove the six 2.5 mm screws securing the battery.

    Editar

  3. HP Spectre x360 13-aw0xxx Speaker Replacement: passo 3, imagem 1 %32 HP Spectre x360 13-aw0xxx Speaker Replacement: passo 3, imagem 2 %32

    • Carefully lift the edge of the battery with an opening tool.

    • Lift the battery up and out.

    Editar

  5. HP Spectre x360 13-aw0xxx Speaker Replacement, Speaker: passo 4, imagem 1 %32 HP Spectre x360 13-aw0xxx Speaker Replacement, Speaker: passo 4, imagem 2 %32

    • Remove the 3 mm Phillips screws on the speaker(s) you wish to replace.

    Editar

  6. HP Spectre x360 13-aw0xxx Speaker Replacement: passo 5, imagem 1 %32 HP Spectre x360 13-aw0xxx Speaker Replacement: passo 5, imagem 2 %32

    • Remove the two 2 mm Phillips #00 screws located under the battery.

    • Repeat for the other speaker if necessary.

    Editar

  7. HP Spectre x360 13-aw0xxx Speaker Replacement: passo 6, imagem 1 %32 HP Spectre x360 13-aw0xxx Speaker Replacement: passo 6, imagem 2 %32 HP Spectre x360 13-aw0xxx Speaker Replacement: passo 6, imagem 3 %32

    • Use a small pry tool to lift up and disconnect the speaker cable from the motherboard.

    Editar

  8. HP Spectre x360 13-aw0xxx Speaker Replacement: passo 7, imagem 1 %32 HP Spectre x360 13-aw0xxx Speaker Replacement: passo 7, imagem 2 %32

    • Using the same pry tool lift up on the speaker housing and remove it.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 10

Últimos 30 dias: 33

Duração total: 301