Ir para o conteúdo principal

HP ProOne 600 G1 Wi-Fi Adapter Replacement

O que você precisa

  1. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: passo 1, imagem 1 %32 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: passo 1, imagem 2 %32
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. HP ProOne 600 G1 Wi-Fi Adapter Replacement: passo 2, imagem 1 %32 HP ProOne 600 G1 Wi-Fi Adapter Replacement: passo 2, imagem 2 %32
    • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

  3. HP ProOne 600 G1 Wi-Fi Adapter Replacement: passo 3, imagem 1 %32
    • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

  4. HP ProOne 600 G1 Wi-Fi Adapter Replacement: passo 4, imagem 1 %32
    • Remove the backplate by pulling it back towards you.

    • Small plastic tabs hold in the backplate, pull these up to remove it.

  5. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: passo 5, imagem 1 %32 HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: passo 5, imagem 2 %32
    • Locate the Wi-Fi adapter at the top right corner of where the stand once was.

    • Unscrew the screws using the Philips #1 Screwdriver.

  6. HP ProOne 600 G1 Wi-Fi Adapter Replacement: passo 6, imagem 1 %32
    • Remove wire tabs from the left side of the Wi-Fi adapter.

    • Remove the adapter

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Janelle Layman

Membro desde: 10/01/15

258 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team 1-20, Maness Fall 2015 Membro de Cal Poly, Team 1-20, Maness Fall 2015

CPSU-MANESS-F15S1G20

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 31

Duração total: 3,865