Ir para o conteúdo principal

HP Photosmart Premium C309g Scanner Replacement

O que você precisa

  1. HP Photosmart Premium C309g Scanner Replacement, Scanner: passo 1, imagem 1 %32
    • Open the top of the printer. The printer should appear as shown.

  2. HP Photosmart Premium C309g Scanner Replacement: passo 2, imagem 1 %32 HP Photosmart Premium C309g Scanner Replacement: passo 2, imagem 2 %32
    • Use the blue plastic opening tool to pry the trim pieces all the way around the printer.

    • Loosen the pieces around the edges before pulling to remove from the printer.

    • Pull the (4) trim pieces off and set them aside.

  3. HP Photosmart Premium C309g Scanner Replacement: passo 3, imagem 1 %32 HP Photosmart Premium C309g Scanner Replacement: passo 3, imagem 2 %32
    • Using the blue plastic opening tool, pull from the middle and then slide back to remove the side panels.

    • The side trim pieces need to be removed before the front trim pieces.

  4. HP Photosmart Premium C309g Scanner Replacement: passo 4, imagem 1 %32
    • Using the T9 Torx Security screwdriver bit, unscrew the five 12mm screws shown.

  5. HP Photosmart Premium C309g Scanner Replacement: passo 5, imagem 1 %32
    • The scanner flap is attached by a clip that can be dislodged by pulling it gently away from the printer.

    • Keeping the scanner flap upright, slide it toward the unattached clip in order to dislodge the second clip.

    • Both clips will come unattached and you can set the scanner flap aside.

  6. HP Photosmart Premium C309g Scanner Replacement: passo 6, imagem 1 %32
    • Lift the scanner glass piece from the printer and set it aside.

  7. HP Photosmart Premium C309g Scanner Replacement: passo 7, imagem 1 %32 HP Photosmart Premium C309g Scanner Replacement: passo 7, imagem 2 %32
    • Gently pick up the scanner piece as shown to see the bottom side and wiring.

  8. HP Photosmart Premium C309g Scanner Replacement: passo 8, imagem 1 %32 HP Photosmart Premium C309g Scanner Replacement: passo 8, imagem 2 %32
    • Gently remove the 2 wire ribbons shown by pulling them away from the scanner piece.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Charles

Membro desde: 10/23/14

371 Reputação

Autoria de 2 guias

Equipe

Michigan Tech, Team 1-2, Lauer Fall 2014 Membro de Michigan Tech, Team 1-2, Lauer Fall 2014

MTU-LAUER-F14S1G2

Membros da 3

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 1,312