Conserte seus objetos Comunidade Loja

HP Pavilion x2 10-n113dx Touch Pad Replacement

Introdução

This guide will show how to replace a touch pad in the HP Pavilion x2 10-n113dx. This guide is moderate in difficulty as one must open up the back of the keyboard. It is important to have a heat pad available so that one can reassemble the gray bumper on the back of the keyboard. The replacement guide requires a Phillips #0 screwdriver and a magnetic board is helpful for keeping track of screws.

O que você precisa

  1. HP Pavilion x2 10-n113dx Touch Pad Replacement, Touch Pad: passo 1, imagem 1 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement, Touch Pad: passo 1, imagem 2 %32

    • Separate the screen from the keyboard.

    Editar

  2. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 2, imagem 1 %32

    • Loosen the adhesive under the gray plastic bar using a heat pad or a heat gun.

    • Remove the gray plastic bar after 5 minutes of light heat with tweezers by pulling up.

    Editar

  3. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 3, imagem 1 %32

    • Remove the 4 screws with a Phillips #0 screwdriver.

    • These 4 screws have a diameter of 4.3 mm and a height of 3.7 mm.

    Editar

  5. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 4, imagem 1 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 4, imagem 2 %32

    • Remove the rubber stoppers at the top left and right with tweezers.

    • Remove the screws at the top and right with at Phillips #0 screwdriver.

    • These two screws have a diameter of 5.3 mm and a height of 4.3 mm.

    Editar

  6. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 5, imagem 1 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 5, imagem 2 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 5, imagem 3 %32

    • Pry open the back case with a metal spudger.

    • Then pry open the back layer with the metal spudger.

    Editar

  7. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 6, imagem 1 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 6, imagem 2 %32

    • Fully take off the back panel by lifting up the panel.

    Editar

  8. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 7, imagem 1 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 7, imagem 2 %32

    • Pop open the ribbon cable piece on the touch pad with the blue plastic spudger.

    • Remove the ribbon cable with tweezers by pulling it out.

    Editar

  9. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 8, imagem 1 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 8, imagem 2 %32

    • Remove 4 screws with at Phillips #0 screwdriver. All 4 screws have a diameter of 4.3 mm and a height of 3.7 mm.

    • Lift the tape shown with orange boxes with tweezers.

    • Remove metal bar with a blue spudger.

    Editar

  10. HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 9, imagem 1 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 9, imagem 2 %32 HP Pavilion x2 10-n113dx Touch Pad Replacement: passo 9, imagem 3 %32

    • Lift up the touch pad by the metal edge with a blue plastic spudger.

    • Remove the touch pad from the computer.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Cayla Skaggs

Membro desde: 04/01/19

337 Reputação

Autoria de 2 guias

Emblemas: 3

Equipe

IUPUI, Team S1-G4, Harley Spring 2019 Membro de IUPUI, Team S1-G4, Harley Spring 2019

IUPUI-HARLEY-S19S1G4

Membros da 3

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 702