Conserte seus objetos Comunidade Loja

HP Pavilion x2 10-n113dx Hinge Replacement

Introdução

The hinge of the HP Pavilion X2 may need replacement if it is damaged, or the screen is unable to open properly. This guide shows how to disassemble the HP Pavilion X2 to allow for removal and replacement of the hinge, which connects the screen with the keyboard.

O que você precisa

  1. HP Pavilion x2 10-n113dx Hinge Replacement, Hinge: passo 1, imagem 1 %32 HP Pavilion x2 10-n113dx Hinge Replacement, Hinge: passo 1, imagem 2 %32

    • Separate the screen from the keyboard.

    Editar

  2. HP Pavilion x2 10-n113dx Hinge Replacement: passo 2, imagem 1 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 2, imagem 2 %32

    • Remove the grey rubber bar using plastic spudger or tweezers, exposing the four screw heads.

    • The rubber bar is attached with an adhesive. A heat pad may be required to melt the adhesive and allow for easier removal.

    Editar

  3. HP Pavilion x2 10-n113dx Hinge Replacement: passo 3, imagem 1 %32

    • Unscrew the four screws using the Phillips #0 screwdriver.

    • All four of these screws have a diameter of 4.3 mm and a height of 3.7 mm.

    Editar

  4. HP Pavilion x2 10-n113dx Hinge Replacement: passo 4, imagem 1 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 4, imagem 2 %32

    • Remove the circular rubber tabs exposing the screw heads below.

    • A heat pad may be required to melt the tab adhesive and allow for easier removal.

    • Unscrew the two screws using the Phillips #0 screwdriver.

    • These two screws are 5.3 mm in diameter and 4.3 mm in height.

    Editar

  6. HP Pavilion x2 10-n113dx Hinge Replacement: passo 5, imagem 1 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 5, imagem 2 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 5, imagem 3 %32

    • Once all screws have been removed, gently pry open the back casing using a metal spudger.

    • Be sure to use the spudger at the marked locations to avoid damage to the casing.

    Editar

  7. HP Pavilion x2 10-n113dx Hinge Replacement: passo 6, imagem 1 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 6, imagem 2 %32

    • Completely remove the back casing.

    Editar

  8. HP Pavilion x2 10-n113dx Hinge Replacement: passo 7, imagem 1 %32

    • Unscrew the four screws located at the marked locations using the Phillips #0 screwdriver.

    • All fours of these screws have a 7.0 mm diameter an a 2.5 mm height.

    Editar

  9. HP Pavilion x2 10-n113dx Hinge Replacement: passo 8, imagem 1 %32

    • Remove adhesive that secures the ribbon cable using tweezers.

    Editar

  10. HP Pavilion x2 10-n113dx Hinge Replacement: passo 9, imagem 1 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 9, imagem 2 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 9, imagem 3 %32

    • Using a plastic spudger, flip open the switch for the connection port, allowing the ribbon cable to be removed.

    Editar

  11. HP Pavilion x2 10-n113dx Hinge Replacement: passo 10, imagem 1 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 10, imagem 2 %32 HP Pavilion x2 10-n113dx Hinge Replacement: passo 10, imagem 3 %32

    • Gently lift the hinge from the attachment points as shown in the picture.

    • Tweezers can be also be used to ensure the ribbon cable does not get damaged in the process.

    • The hinge can now be completely separated.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Ajay Panuganti

Membro desde: 04/01/19

181 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

IUPUI, Team S1-G4, Harley Spring 2019 Membro de IUPUI, Team S1-G4, Harley Spring 2019

IUPUI-HARLEY-S19S1G4

Membros da 3

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 14

Duração total: 1,120