Introdução

This guide shows how to take apart the HP Pavilion X2 laptop to expose the SSD card to replace it with a new one.

Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly. Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly. Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.
  • Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.

Adicionar comentário

Gently lift and remove the display panel from the assembly. Gently lift and remove the display panel from the assembly.
  • Gently lift and remove the display panel from the assembly.

Adicionar comentário

Remove the tape that covers the battery connector on the system board and carefully disconnect the battery cable from its connector on the system board. Remove the tape that covers the battery connector on the system board and carefully disconnect the battery cable from its connector on the system board. Remove the tape that covers the battery connector on the system board and carefully disconnect the battery cable from its connector on the system board.
  • Remove the tape that covers the battery connector on the system board and carefully disconnect the battery cable from its connector on the system board.

Adicionar comentário

Carefully disconnect the white ribbon cable from the system board. Carefully disconnect the white ribbon cable from the system board. Carefully disconnect the white ribbon cable from the system board.
  • Carefully disconnect the white ribbon cable from the system board.

Adicionar comentário

Using the Phillips #0 screwdriver, carefully remove the 4 corner screws  that hold the battery to the display panel. 3 screws are 3.12 mm head, 2.40 mm length, and 1 screw is 5.85mm head, 2.5mm length. Remove the battery from the device.
  • Using the Phillips #0 screwdriver, carefully remove the 4 corner screws that hold the battery to the display panel.

  • 3 screws are 3.12 mm head, 2.40 mm length, and 1 screw is 5.85mm head, 2.5mm length.

  • Remove the battery from the device.

How do you replace those magnets that help snap the laptop's into place?

Alfa Orellana - Responder

To unscrew the SSD card use the Phillips #0 Screwdriver to remove two types of screws. Three 4.15mm head, 2.35mm in length screws and three 3.32mm head, 3.99mm in length screws To unscrew the SSD card use the Phillips #0 Screwdriver to remove two types of screws. Three 4.15mm head, 2.35mm in length screws and three 3.32mm head, 3.99mm in length screws To unscrew the SSD card use the Phillips #0 Screwdriver to remove two types of screws. Three 4.15mm head, 2.35mm in length screws and three 3.32mm head, 3.99mm in length screws
  • To unscrew the SSD card use the Phillips #0 Screwdriver to remove two types of screws. Three 4.15mm head, 2.35mm in length screws and three 3.32mm head, 3.99mm in length screws

Adicionar comentário

Remove the SSD card. Remove the SSD card. Remove the SSD card.
  • Remove the SSD card.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

David Zambrano

Member since: 28-09-2017

597 reputação

5 Guides authored

Equipe

USF Tampa, Team S13-G4, Boczar Fall 2017 Membro de USF Tampa, Team S13-G4, Boczar Fall 2017

USFT-BOCZAR-F17S13G4

4 Membros

5 Guides authored

Is this about the WiFi card? Because I cant see the SSD in any of your pictures.

Julian Lemmerich - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 5

Últimos 7 dias: 45

Últimos 30 dias: 242

Todo: 1,449