Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Slide pill shaped tab to the other side of the channel.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Unscrew the two screws JIS #0 located on opposites sides of the panel.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove 3 screws located where the battery previously was.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove 6 screws located under the spot where the smaller L-shaped panel was located.
-