Introdução

This is a RAM replacement for HP Pavilion dv7t-7000.

Peças

Não são necessárias peças.

  1. Turn the computer off and disconnect if from all power sources.
    • Turn the computer off and disconnect if from all power sources.

  2. Slide the battery release switch to the left.
    • Slide the battery release switch to the left.

  3. Hold the release switch all of the way to the left and your other hand to pull the battery out.
    • Hold the release switch all of the way to the left and your other hand to pull the battery out.

  4. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  5. Unscrew the single Phillips #00 screw.
    • Unscrew the single Phillips #00 screw.

    • Screw will not come out, it is connected to the panel

  6. Remove service hatch by sliding away from the computer and lifting up. Remove service hatch by sliding away from the computer and lifting up.
    • Remove service hatch by sliding away from the computer and lifting up.

  7. Push the retraining springs away from the RAM at the same time to unlock the RAM. Push the retraining springs away from the RAM at the same time to unlock the RAM.
    • Push the retraining springs away from the RAM at the same time to unlock the RAM.

  8. Pull the RAM out. Follow the same procedure for the additional RAM.
    • Pull the RAM out.

    • Follow the same procedure for the additional RAM.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Afnan

Member since: 21-02-2018

289 reputação

3 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 68