Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the two screws securing the RAM shield to the lower case.
-
Lift and remove the RAM shield up from the lower case.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
Ferramenta utilizada nesse passo:Tweezers$4.99-
Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.
-
Grasp the wireless card and pull it straight out of its socket on the motherboard.
-
Cancelar: não concluí este guia.
5 outras pessoas executaram este guia.