Introdução

If your hard drive is not working or you want to add in a larger hard drive, follow this guide.

Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield.
  • Remove the two screws from the hard drive shield and lift it off starting at the right side. The screws will remain in the shield.

Adicionar comentário

Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts.
  • Pull the plastic tab attached to the hard drive. The hard drive lifts right out. Pull gently so you don't damage the contacts.

Adicionar comentário

  • Now you have your hard drive out!

Adicionar comentário

  • Gently pull forward the HP adapter from the top of the hard drive.

  • Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

15 outras pessoas concluíram este guia.

Ben Hirsch

Member since: 05-10-2010

3.622 reputação

10 Guides authored

Equipe

Cal Poly, Team 21-33, Regan Fall 2010 Membro de Cal Poly, Team 21-33, Regan Fall 2010

CPSU-REGAN-F10S21G33

4 Membros

10 Guides authored

thanks for your help

moyguens - Responder

I was scratching my head when I recvd the new hd w/out the adapter... LOL! thanks

gilaraujog - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 40

Últimos 30 dias: 178

Todo: 34,819