HP Pavilion TouchSmart 14z-n100 Keyboard Replacement

Introdução

Follow this guide to replace the keyboard on a HP Pavilion TouchSmart 14z-n100. You will need a number 1 Phillips screwdriver, a plastic spudger and a replacement keyboard.

O que você precisa

Passo 1 Keyboard

HP Pavilion TouchSmart 14z-n100 Keyboard Replacement, Keyboard: passo 1, imagem 1 %32

Remove these two, 4 mm long number 1 Phillips screws from the device.

Editar

Passo 2

Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.

Editar

Passo 3

Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.

Editar

Passo 4

HP Pavilion TouchSmart 14z-n100 Keyboard Replacement: passo 4, imagem 3 %32

Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.

Editar