Introdução

The front panel door may not close properly after repeated use. This guide will show how to remove the front panel door.

Peças

Não são necessárias peças.

  1. Open the front panel door by pulling forward on the slot located on the front-left side of the printer.
    • Open the front panel door by pulling forward on the slot located on the front-left side of the printer.

    Adicionar comentário

  2. Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.
    • Insert the plastic opening tool into the right socket connecting the front panel door to the hinge guide.

    • Pry the socket open, lifting the door hinge guide out of place.

    Adicionar comentário

    • Pull the door-hinge guide to the right to detach its left socket.

    • Lift the door-hinge guide upward and away from the front panel door.

    Adicionar comentário

    • Grab the front panel door close to its hinge on the right side.

    • Pull the front panel door away from the printer toward you.

    • Extra force may be required to pull the door from its hinge.

    Adicionar comentário

    • Grab the front panel door close to its two hinges on the left side.

    • Pull the front panel door away from the printer toward you.

    • Extra force may be required to pull the door from its hinges.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Maegan Betz

Member since: 18-04-2018

179 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S16-G4, Livingston Spring 2018 Membro de Cal Poly, Team S16-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G4

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 50

Todo: 328