Ir para o conteúdo principal

HP Officejet Pro 6835 Cover Disassembly

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. HP Officejet Pro 6835 Cover Disassembly, HP Officejet Pro 6835 Cover Disassembly: passo 1, imagem 1 %32
    • Open the main lid as far as it will go.

    • Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.

    • Open the lid further.

  2. HP Officejet Pro 6835 Cover Disassembly: passo 2, imagem 1 %32 HP Officejet Pro 6835 Cover Disassembly: passo 2, imagem 2 %32 HP Officejet Pro 6835 Cover Disassembly: passo 2, imagem 3 %32
    • Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise.

    • The two screws above the screen assembly are deep so you may need a long screwdriver.

  3. HP Officejet Pro 6835 Cover Disassembly: passo 3, imagem 1 %32
    • Grab the main cover and lift it up slightly.

    • Do not pull too hard—there is a cable connecting the cover to the printer.

  4. HP Officejet Pro 6835 Cover Disassembly: passo 4, imagem 1 %32 HP Officejet Pro 6835 Cover Disassembly: passo 4, imagem 2 %32
    • Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jake Park

Membro desde: 01/24/18

465 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team S2-G4, Livingston Winter 2018 Membro de Cal Poly, Team S2-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G4

Membros da 4

Autoria de 16 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 65