Ir para o conteúdo principal

HP Officejet Pro 6230 Printer Power Adaptor Replacement

O que você precisa

  1. HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: passo 1, imagem 1 %32 HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: passo 1, imagem 2 %32
    • Turn the printer around and locate the back panel for power.

    • Note: If you are unsure where the panel is located, look in the back right corner. The panel has “100-240V~50/60 Hz 700 mA” inscribed on it.

  2. HP Officejet Pro 6230 Printer Power Adaptor Replacement: passo 2, imagem 1 %32
    • Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.

    • Note: Rotate the screw counterclockwise to loosen. Keep it in a safe place.

  3. HP Officejet Pro 6230 Printer Power Adaptor Replacement: passo 3, imagem 1 %32
    • Remove the HP AC Power Adapter from the slot.

  4. HP Officejet Pro 6230 Printer Power Adaptor Replacement: passo 4, imagem 1 %32
    • Locate the blue/green/red wire attached to the back of the adapter.

  5. HP Officejet Pro 6230 Printer Power Adaptor Replacement: passo 5, imagem 1 %32
    • Unplug the current adapter from the wire.

    • Grasp the end of the connector, not the wires, to pull it out.

  6. HP Officejet Pro 6230 Printer Power Adaptor Replacement: passo 6, imagem 1 %32
    • Affix the new adapter to the same wire.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Natalie Carmona

Membro desde: 01/28/17

101 Reputação

Autoria de 1 guia

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 14

Duração total: 1,078