Introdução

If your device will not fax, one possible solution is to replace the fax feeder. The fax feeder is necessary for sending more than one page of a fax at a time, and if it is malfuctioning, the printer may not fax at all.

Peças

Não são necessárias peças.

Lift the fax feeder cover until it stands on its own.
  • Lift the fax feeder cover until it stands on its own.

Adicionar comentário

Use the plastic opening tool to unclasp the hinge that holds the feeder cover.
  • Use the plastic opening tool to unclasp the hinge that holds the feeder cover.

Adicionar comentário

  • Lift the green tab to remove the fax feeder from the printer.

Adicionar comentário

  • Use the plastic opening tool to pry the pivot point apart while lifting the feeder up.

    • There is still a cable holding the part to the rest of the printer.

Adicionar comentário

  • Use a screwdriver to remove the single 9mm T10 screw.

  • Remove the wire cover and pull the wire away from the printer. The fax feeder head is now free to be separated from the printer.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Isaac Jacobsen

Member since: 23-01-2018

144 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S18-G3, Livingston Winter 2018 Membro de Cal Poly, Team S18-G3, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G3

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 13

Todo: 76