Introdução

Use this guide to remove the battery and the back cover of your laptop in order to repair or install new parts.

  1. Before beginning, make sure that your computer is turned off and all external power cords are disconnected.
    • Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

    • Close the laptop and turn it over, so that the underside is up and the silver battery bay is facing towards you.

    Adicionar comentário

  2. Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery.
    • Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery.

    • Locate the battery release latch on the bottom left and slide it inward.

    • Pull the battery towards you to remove it from the laptop.

    Adicionar comentário

    • Locate the service access cover release lever and slide it to the right.

    • While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop.

    Adicionar comentário

    • If you are performing any installations after the battery, orient the computer so that the underside is up, and the battery port is facing away from you.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Sean Kuster

Member since: 05-10-2012

73 reputação

3 Guides authored

Equipe

Cal Poly, Team 3-23, Amido Fall 2012 Membro de Cal Poly, Team 3-23, Amido Fall 2012

CPSU-AMIDO-F12S3G23

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 1,212