Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

HP Mini 1000 Hard Drive Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. HP Mini 1000 Hard Drive Replacement, Hard Drive: passo 1, imagem 1 %32 HP Mini 1000 Hard Drive Replacement, Hard Drive: passo 1, imagem 2 %32
    • Use your fingernail or the flat end of a spudger to flip up the retaining flap on the SIM card ribbon cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

    • Pull the SIM card ribbon cable out of its socket and peel it off the top of the hard drive enclosure.

  2. HP Mini 1000 Hard Drive Replacement: passo 2, imagem 1 %32
    • Use your fingernail or the flat end of a spudger to flip up the retaining flap on the hard drive cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

  3. HP Mini 1000 Hard Drive Replacement: passo 3, imagem 1 %32
    • Remove the two 4.5 mm Phillips screws securing the hard drive to the lower case.

  4. HP Mini 1000 Hard Drive Replacement: passo 4, imagem 1 %32 HP Mini 1000 Hard Drive Replacement: passo 4, imagem 2 %32
    • Lift the hard drive up and out of the lower case, being careful not to damage its cable in the process.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 76