Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Removing the back panel is the necessary prerequisite for replacing many of the components of the HP Envy Touchsmart m6-k125dx. It is the part that covers the inside components and is held together by several screws underneath the laptop.

Peças

Nenhum componente especificado.

  1. Turn the laptop over so that the bottom is facing up Using the J0 screwdriver, unscrew all 12 M2.5x5.5 screws from the back panel.
    • Turn the laptop over so that the bottom is facing up

    • Using the J0 screwdriver, unscrew all 12 M2.5x5.5 screws from the back panel.

  2. Carefully remove the back panel to reveal the inner components.
    • Carefully remove the back panel to reveal the inner components.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Shawn

Membro desde: 25/09/2017

237 Reputação

2 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 11

Duração total: 561