Ir para o conteúdo principal

HP Envy 5660 Printhead Replacement

O que você precisa

  1. HP Envy 5660 Printhead Replacement, Printhead: passo 1, imagem 1 %32
    • Open the printer so that the underside of the scanner is showing.

  2. HP Envy 5660 Printhead Replacement: passo 2, imagem 1 %32
    • Unscrew the black 11.5 mm screw closest to the front right corner using a T10 screw bit.

  3. HP Envy 5660 Printhead Replacement: passo 3, imagem 1 %32
    • Remove right side of the printer using a plastic opening tool or metal spudger.

  4. HP Envy 5660 Printhead Replacement: passo 4, imagem 1 %32
    • Remove spring from the side of the print head rail using a metal spudger.

  5. HP Envy 5660 Printhead Replacement: passo 5, imagem 1 %32 HP Envy 5660 Printhead Replacement: passo 5, imagem 2 %32
    • Push the metal rail the print head rests on inwards to remove it from its bearings.

  6. HP Envy 5660 Printhead Replacement: passo 6, imagem 1 %32
    • Remove the belt from the back of the print head using a metal spudger.

  7. HP Envy 5660 Printhead Replacement: passo 7, imagem 1 %32
    • Remove the print head from the metal rail by sliding it off the rail.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Ryan Steakley

Membro desde: 01/23/18

781 Reputação

Autoria de 5 guias

Equipe

Cal Poly, Team S1-G6, Livingston Winter 2018 Membro de Cal Poly, Team S1-G6, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G6

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 8

Últimos 30 dias: 48

Duração total: 4,856