HP Envy 4-1030us Bottom Cover Replacement

Introdução

Removing the bottom cover/door of the system is the first step in accessing the rest of the internal components of the system. After removing the screws, the cover is just held in place physically by its plastics, so be firm, but gentle, when removing it after loosening the connections.

O que você precisa

Passo 1 Bottom Cover

HP Envy 4-1030us Bottom Cover Replacement, Bottom Cover: passo 1, imagem 1 %32

HP Envy 4-1030us Bottom Cover Replacement, Bottom Cover: passo 1, imagem 2 %32

Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.

Editar

Passo 2

Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.
Lift the bottom cover off of the system.

Editar