HP Elitebook 820 G1 Keyboard Replacement

Introdução

This guide demonstrates how to safely remove and replace a damaged or malfunctioning keyboard. Following these steps should ensure a simple replacement for a keyboard that has experienced a spill, is missing keys, or otherwise does not function correctly.

O que você precisa

Passo 1 Battery

HP Elitebook 820 G1 Keyboard Replacement, Battery: passo 1, imagem 1 %32

Ensure the laptop is completely powered off and power adapter is unplugged before removing the battery.
Turn over laptop so that the bottom is showing.
Unlock the latch.

Editar

Passo 2

Remove the back cover and you will then be able to see the battery.

Editar

Passo 3

Unlatch the two latches securing the battery in the case.

Editar

Passo 4

Use a plastic opening tool to lift and remove the battery.

Editar

Passo 5 Keyboard

HP Elitebook 820 G1 Keyboard Replacement, Keyboard: passo 5, imagem 1 %32

Remove the two Phillips #0 screws securing the keyboard to the laptop.
Turn the laptop over and lift the display to reveal the keyboard.

Editar

Passo 6

Insert the plastic spudger between the keyboard and the housing.
Start at the corner.

Editar

Passo 7

HP Elitebook 820 G1 Keyboard Replacement: passo 7, imagem 3 %32

4 tabs are located at the top of the keyboard, which lock it in place.
Pry and twist the spudger along the top of the keyboard until each tab is released.

Editar

Passo 8

Pull back the keyboard from the top.
Be mindful of the fragile cables behind it.

Editar

Passo 9

HP Elitebook 820 G1 Keyboard Replacement: passo 9, imagem 3 %32

Flip up the connecting flap on each of the three ribbon cables.
The small cable on the last picture ist only there, if you have a backlit keyboard. If you want to replace a keyboard without backlight, there will be no cable on your original keyboard.

Editar