Ir para o conteúdo principal

HP EliteOne 800 G1 Removing Stand Replacement

O que você precisa

  1. HP EliteOne 800 G1 Removing Stand Replacement, Removing Stand: passo 1, imagem 1 %32 HP EliteOne 800 G1 Removing Stand Replacement, Removing Stand: passo 1, imagem 2 %32
    • Press locking latch on the bottom of the base of the stand.

    • Pull the plastic cover off of the stand.

  2. HP EliteOne 800 G1 Removing Stand Replacement: passo 2, imagem 1 %32 HP EliteOne 800 G1 Removing Stand Replacement: passo 2, imagem 2 %32
    • Use a Torx T15 driver and stick it through the holes on the stand in order to remove the two 12mm screws on the back of the main unit.

    • Tilt stand and lift up to remove it.

  3. HP EliteOne 800 G1 Removing Stand Replacement: passo 3, imagem 1 %32 HP EliteOne 800 G1 Removing Stand Replacement: passo 3, imagem 2 %32
    • Use a Torx T15 driver to remove the single 10mm screw on the back panel.

    • Pull the back panel toward the bottom of the device to remove it.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Michael Ewing

Membro desde: 10/01/15

1.071 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 1-24, Maness Fall 2015 Membro de Cal Poly, Team 1-24, Maness Fall 2015

CPSU-MANESS-F15S1G24

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 22

Duração total: 3,004