Conserte seus objetos Comunidade Loja

HP EliteOne 800 G1 Fan Assembly Replacement

Introdução

This guide is meant to remedy a faulty fan. Signs of a defective fan include overheating, rapid battery power depletion or grinding noises. This guide involves many small parts, do not lose track of these because they are necessary for reassembly.

O que você precisa

  1. HP EliteOne 800 G1 Fan Assembly Replacement, Removing the Back Cover: passo 1, imagem 1 %32 HP EliteOne 800 G1 Fan Assembly Replacement, Removing the Back Cover: passo 1, imagem 2 %32 HP EliteOne 800 G1 Fan Assembly Replacement, Removing the Back Cover: passo 1, imagem 3 %32

    • Place computer with the screen down on a flat surface.

    • Push the two locking latches to the unlocked position.

    • Push the cover toward the top of the computer and lift up.

    Editar

  2. HP EliteOne 800 G1 Fan Assembly Replacement, Removing Stand: passo 2, imagem 1 %32 HP EliteOne 800 G1 Fan Assembly Replacement, Removing Stand: passo 2, imagem 2 %32

    • Press locking latch on the bottom of the base of the stand.

    • Pull the plastic cover off of the stand.

    Editar

  4. HP EliteOne 800 G1 Fan Assembly Replacement: passo 3, imagem 1 %32 HP EliteOne 800 G1 Fan Assembly Replacement: passo 3, imagem 2 %32

    • Use a Torx T15 driver and stick it through the holes on the stand in order to remove the two 12mm screws on the back of the main unit.

    • Tilt stand and lift up to remove it.

    Editar

  5. HP EliteOne 800 G1 Fan Assembly Replacement: passo 4, imagem 1 %32 HP EliteOne 800 G1 Fan Assembly Replacement: passo 4, imagem 2 %32

    • Use a Torx T15 driver to remove the single 10mm screw on the back panel.

    • Pull the back panel toward the bottom of the device to remove it.

    Editar

  6. HP EliteOne 800 G1 Fan Assembly Replacement, Fan Assembly: passo 5, imagem 1 %32

    • Disconnect these two power connectors on the motherboard, one connector is white and the other is black. You can identify the correct wires by their braided colors: red, yellow, blue, and black.

    Editar

  7. HP EliteOne 800 G1 Fan Assembly Replacement: passo 6, imagem 1 %32 HP EliteOne 800 G1 Fan Assembly Replacement: passo 6, imagem 2 %32

    • Use a Torx T15 driver to remove the three 6mm screws surrounding the fan assembly.

    • Pull the fan assembly up from the case to remove it.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

Michael Ewing

Membro desde: 10/01/15

1.071 Reputação

Autoria de 4 guias

Emblemas: 12

+9 outros emblemas

Equipe

Cal Poly, Team 1-24, Maness Fall 2015 Membro de Cal Poly, Team 1-24, Maness Fall 2015

CPSU-MANESS-F15S1G24

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 8

Últimos 30 dias: 26

Duração total: 6,769