Introdução

Use this guide to replace and / or maintain the rear facing camera.

  1. With the screen face down, lift up the stand as far as it goes.
    • With the screen face down, lift up the stand as far as it goes.

    • Make sure not to force it past the resting point.

  2. Use a screwdriver to remove the six screws on the back of the tablet. (The screws were not in our device, so we do not know what kind of screwdriver to use.)
    • Use a screwdriver to remove the six screws on the back of the tablet.

    • (The screws were not in our device, so we do not know what kind of screwdriver to use.)

  3. After removing the screws, delicately close the stand.
    • After removing the screws, delicately close the stand.

    • Flip the tablet on its back so that the screen is facing up.

  4. Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion. Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.
    • Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion.

    • Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.

  5. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Remove the tape on the lower left side of the screen. Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen. Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.
    • Remove the tape on the lower left side of the screen.

    • Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.

  7. Disconnect the flex cable from the device using the spudger. Remove the Display Assembly from the device.
    • Disconnect the flex cable from the device using the spudger.

    • Remove the Display Assembly from the device.

  8. Use a pair of tweezers to remove the flex cable on the top of the camera.
    • Use a pair of tweezers to remove the flex cable on the top of the camera.

  9. Use a Phillips #00 screwdriver to remove the screw in the corner of the camera.
    • Use a Phillips #00 screwdriver to remove the screw in the corner of the camera.

  10. Use a spudger to delicately lift up the camera.
    • Use a spudger to delicately lift up the camera.

  11. Use a pair of tweezers to disconnect the flex cable from the motherboard and remove the rear facing camera from the device. Use a pair of tweezers to disconnect the flex cable from the motherboard and remove the rear facing camera from the device.
    • Use a pair of tweezers to disconnect the flex cable from the motherboard and remove the rear facing camera from the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Colin Mika

Member since: 19-04-2018

773 reputação

6 Guides authored

Equipe

Cal Poly, Team S24-G7, Maness Spring 2018 Membro de Cal Poly, Team S24-G7, Maness Spring 2018

CPSU-MANESS-S18S24G7

4 Membros

6 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Todo: 73