HP ENVY 6055e Input Tray Replacement

Introdução

If your HP ENVY 6055e printer has lost the ability to feed paper into the printer, you likely have a defective input tray. This guide will demonstrate how to replace the input tray of an HP ENVY 6055e printer. All you need for this guide is a T3 Torx Screwdriver, and you are ready to begin the replacement.

Make sure you have unplugged your device before you begin to repair it.

O que você precisa

Passo 1 Input Tray

HP ENVY 6055e Input Tray Replacement, Input Tray: passo 1, imagem 1 %32

HP ENVY 6055e Input Tray Replacement, Input Tray: passo 1, imagem 2 %32

HP ENVY 6055e Input Tray Replacement, Input Tray: passo 1, imagem 3 %32

Flip the printer upside down.

Editar

Passo 2

Slide the input tray open.

Editar

Passo 3

Remove the six T3 Torx screws.

Editar

Passo 4

Remove the right piece by lifting it up.

Editar

Passo 5

HP ENVY 6055e Input Tray Replacement: passo 5, imagem 3 %32

Remove the left piece by lifting it with both hands.
The left piece has a small hook in the middle, so be careful not to break it.

Editar

Passo 6

Locate two springs that are in the lower part of the printer.

Editar

Passo 7

HP ENVY 6055e Input Tray Replacement: passo 7, imagem 3 %32

Remove the right spring by lifting from the black plastic piece.
Make sure the input tray is in the original closed place when putting back this piece.

Editar