Ir para o conteúdo principal

HP 15-ay103dx Back Panel Replacement

O que você precisa

  1. HP 15-ay103dx Back Panel Replacement, Battery: passo 1, imagem 1 %32
    • Slide the two battery lock latches on the back of the device to the “unlock” position.

  2. HP 15-ay103dx Back Panel Replacement: passo 2, imagem 1 %32
    • Lift the battery upward to remove it from the device.

  3. HP 15-ay103dx Back Panel Replacement, Back Panel: passo 3, imagem 1 %32
    • Using the PH1 phillips-head screwdriver, remove all the 5/16 in. screws from the back of the device.

    • There should be 10 in total, be sure to keep them together!

  4. HP 15-ay103dx Back Panel Replacement: passo 4, imagem 1 %32
    • Locate the optical disc drive and remove it from the device by sliding it straight of the device.

  5. HP 15-ay103dx Back Panel Replacement: passo 5, imagem 1 %32 HP 15-ay103dx Back Panel Replacement: passo 5, imagem 2 %32
    • Covering the hinges of the device are rubber bumpers secured to the device using adhesive. Remove them carefully.

    • Place the adhesive side up as you will need to place them back after your replacement is complete.

  6. HP 15-ay103dx Back Panel Replacement: passo 6, imagem 1 %32 HP 15-ay103dx Back Panel Replacement: passo 6, imagem 2 %32
    • In the same spot you’ve just removed the bumpers from, you will find two 5/16 in. screws. Using the same Phillips-head screwdriver used in step 2, remove the screws

    • Be sure to keep the screws together!

  7. HP 15-ay103dx Back Panel Replacement: passo 7, imagem 1 %32
    • Carefully remove the back panel from the device.

    • If you are unable to do this with your hands, you can use a thin prying tool of your choice to make it easier!

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 7

Duração total: 1,482