Ir para o conteúdo principal

HP 14-ac151nr DC Power Jack Replacement

O que você precisa

  1. HP 14-ac151nr DC Power Jack Replacement, Backplate: passo 1, imagem 1 %32
    • Remove battery by pushing the two buttons inward.

  2. HP 14-ac151nr DC Power Jack Replacement: passo 2, imagem 1 %32
    • Remove the two rubber feet next to the battery.

  3. HP 14-ac151nr DC Power Jack Replacement: passo 3, imagem 1 %32
    • Remove all 14 Phillips head #0 screws.

  4. HP 14-ac151nr DC Power Jack Replacement: passo 4, imagem 1 %32
    • Use a plastic opener tool to pry off the black backplate.

  5. HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: passo 5, imagem 1 %32 HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: passo 5, imagem 2 %32
    • Remove the black tape near the power jack.

    • Remove the screws connecting monitor to the bottom of the computer.

  6. HP 14-ac151nr DC Power Jack Replacement: passo 6, imagem 1 %32
    • Position the metal fittings attached to the monitor out of the way.

    • The monitor is still attached by wires — be careful not to pull on it too hard.

  7. HP 14-ac151nr DC Power Jack Replacement: passo 7, imagem 1 %32 HP 14-ac151nr DC Power Jack Replacement: passo 7, imagem 2 %32 HP 14-ac151nr DC Power Jack Replacement: passo 7, imagem 3 %32
    • Disconnect the power jack from the motherboard.

    • Remove the power jack by lifting it up.

    • An opener tool may make this easier.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Antonio Leonti

Membro desde: 10/26/18

410 Reputação

Autoria de 3 guias

Equipe

UMass Dartmouth, Team S1-G7, Simcock Fall 2018 Membro de UMass Dartmouth, Team S1-G7, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G7

Membros da 3

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 6

Últimos 30 dias: 13

Duração total: 434