Ir para o conteúdo principal

HKC P776A Battery Replacement

O que você precisa

  1. HKC P776A Battery Replacement, Separating Digitizer and Case: passo 1, imagem 1 %32
    • Insert the plastic opening tool between the digitizer and the case.

    • Place the spudger in the gap created by the plastic opening tool to assist in separation.

  2. HKC P776A Battery Replacement: passo 2, imagem 1 %32 HKC P776A Battery Replacement: passo 2, imagem 2 %32
    • Slide the spudger along the perimeter of the device to fully separate the two pieces.

  3. HKC P776A Battery Replacement, Battery: passo 3, imagem 1 %32
    • Insert the plastic opening tool between the battery and case.

    • Apply leverage to break the glue that is attaching the battery to the case.

  4. HKC P776A Battery Replacement: passo 4, imagem 1 %32
    • Continue breaking the glue along the perimeter of the battery until the battery can be removed.

    • Breaking all the glue between the battery and case may take a long time.

  5. HKC P776A Battery Replacement: passo 5, imagem 1 %32 HKC P776A Battery Replacement: passo 5, imagem 2 %32
    • Using the soldering iron, heat up the solder that is attaching the battery to the motheboard.

    • The heat from the soldering iron may cause personal injury or damage the internal components of the tablet.

  6. HKC P776A Battery Replacement: passo 6, imagem 1 %32
    • Suck up the leftover solder using the desoldering pump.

    • Remove the battery from the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ryan Gornati

Membro desde: 01/22/15

409 Reputação

Autoria de 4 guias

Equipe

USF Tampa, Team 7-6, Remmell Winter 2015 Membro de USF Tampa, Team 7-6, Remmell Winter 2015

USFT-REMMELL-W15S7G6

Membros da 3

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 7

Duração total: 639